Merchandise Presentation:
Wheelchair lifts are lifts specifically created and created for individuals with disabilities. In order to facilitate the journey and sightseeing of the disabled, in communities, hospitals, faculties, resorts, lodges, community places and other locations. It can be employed indoors or outdoor, with lovely construction, basic safety and stability, and simple to use. It can be CZPT according to your demands.
Measurement Info:
System peak | one-10m |
Platform dimension | 1200x900mm or CZPT |
Load | 250-300kg |
Functions:
one. It can be utilised indoors or outside.
two. It is simple to set up, no want a pit.
three. It runs stably CZPT sounds.
four. It can be CZPT in accordance to your requirements.
five. It has two manage strategy: button and remote management.
six. It has crisis descent device if energy-off predicament takes place.
How To Use:
A. Before use:
one. The elevator carry has been inspected and debugged just before leaving the factory, and all technological indicators have reached the design requirements. The consumer only requirements to read through this handbook carefully and strictly stick to the measures when employing it.
two. Non-experts are not permitted to adjust the hydraulic method, electrical control technique and elevator structural elements.
3. When the elevator raise is mounted and used for the first time, carefully examine no matter whether there is any abnormality in the hydraulic strain, electrical appliances, and structural components, and debug it only when there is no abnormality. Perform the load test after three to five occasions of no-load. This stage is also relevant after the elevator overhaul.
four. The elevator raise has a guiding structure, meticulously verify the verticality and parallelism of the guiding framework, and debug it only right after confirming that the guiding structure is great. The elevator shall not be loaded in the course of first commissioning.
5. For elevator lifts that are out of service for a lengthy time, sections 2 to 4 of this chapter need to be carried out prior to use.
B. In the course of use:
one. The procedure of the elevator is designed as a entirely automatic operation mode. Just simply click the corresponding button on the manage box to recognize the corresponding action, and the cabin will stop immediately when it reaches the corresponding ground. The realization of these functions is understood by electrical appliances this sort of as AC contactors and limit switches.
2. No overloading.
C. Right after use (routine maintenance):
1. Whether there is abnormal noise in various parts. If so, it need to be dealt with in time.
two. Clean the hydraulic pump following one year of operation of the elevator elevate, and exchange the severely worn rotating and transmission areas such as shaft pins.
three. After the elevator lift has been operating for 1 12 months, examine no matter whether the handle circuit and electrical appliances are corroded and rusted, and whether the joints of the circuit are unfastened, collapsed, rusted, and many others. Uncover issues and deal with them in time.
four. Replace the hydraulic oil at least once every single six months. If the frequency of use is higher, replace the hydraulic oil when each and every 3 months.
FAQ:
1. Is your product CZPT?
Yes, due to the fact the conditions are diverse, all merchandise are CZPT relying on depth requirement! If you give us more information about our items, we will give you a extremely rapid quotation!
two. What is the information ought to I offer when inquiry?
The far more detailed information you supply, the far more precise solution we can put together for you! These kinds of as the capability, carry top, energy supply or other specials you give us will be far more appreciated.
three. What is the bare minimum purchase quantity?
It is a single established, and of training course, the more the better.
four. Are you a manufacturer or a dealer?
We are a well-known hydraulic lift manufacturer in China. You are welcome to have a check out to our manufacturing unit.