The low-speed five-coloration printing equipment is suitable for printing the surface of aluminum,lead-tin, zinc and other steel tubes. It can recognize polychrome printing of patterns in five shades.
The tools can automatically insert the tubes from the pin of the conveyor chain that require to be printed on the mandrel for printing, and can instantly send out the printed tubes to the pin of the conveyor chain for drying.
If no tube on the mandrel, the products can yield automatically through the proximity switch and the cylinder switch to stay away from the mandrel currently being printed with ink.
This gear converts the constantly running conveyor chain into intermittent movement by means of the eccentric motion of an eccentric wheel. When the conveyor chain pauses for a brief time, the gripper will unplug the printed tube from the mandrel and insert the conveyor chain pin so that the tubes can enter the oven.
Primary specialized parameters
|
1.Tube selection |
Φ11-φ35 |
|
2.Tube duration |
≤200 |
|
three.Creation velocity |
≤60pcs/min |
|
four.Major motor |
GH40-20S-3700 |
|
five.Inlet pressure |
.4Mpa |
|
6.Proportions |
2200mm*1550mm*1750mm |
|
7.Excess weight |
4150kg |
