Product Description
Carbon Belts
Kaihong brand CHT series carbon fiber bicycle synchronous belt launched by ZHangZhoug Sanxing Rubber Belt Co. , Ltd. uses high performance HNBR rubber, ultra- high strength carbon fiber rope and high wear- resistant nylon toothed cloth to perfectly replace the traditional chain. It needs no lubrication when used, has low noise, high transmission efficiency, and is stable and comfortable when riding.
Production Features of Carbon Belts
Carbon Belts is built for better performance, more flexibility, and greater resistance to moisture. Input your Poly Chain GT Carbon belt specs to determine the optimal tension for your belt drive system.
Features:
- -40ºC~150ºC; Ultra-wide operating temperature range: -40ºC~150ºC
- Excellent mechanical and chemical properties, ultra-high tooth shear force, effectively avoid tooth jump
- Carbon cord with ultra-high-strength and lowest elongation
Advantages:
- Patented PTFE coating tooth fabric, super wear-resistant, self-lubricating, low noise, and long life
- Back nylon design, high transverse strength, low vibration, perfect protection for the back of belt.
- Optimized mm tooth profile, perfect meshing with pulley, especially suitable for the bicycle industry
Product specification of Carbon Belts
- 1. Specially treated fabric
- 2. Polyurethane teeth
- 3. Carbon tension member
- 4. Polyurethane backing
Structure and materials
Top cloth: nylon elastic cloth ( enhance transverse strength and reduce vibration)
Cord : carbon fiber thread ( ultra- high tensile strength, extremely low elongation)
Rubber: HNBR rubber( excellent wear resistance, temperature resistance, aging resistance and bending resistance)
Tooth cloth: nylon elastic cloth ( to enhance the strength and wear resistance of belt tee
Basic size
| Type | Pitch | Tooth height | Thickness | Width |
| H8M | 8mm | 3.38±0.2mm | 5.5±0.6mm | 12±0.4mm |
| H11M | 11mm | 5.0±0.2mm | 7.5±0.6mm | 12±0.4mm |
Physical properties
| Type | tensile strength (annular) | Tooth shear |
| H8M | ≥ 1330N/mm | ≥ 130N/mm |
| H11M | ≥ 1670N/mm | ≥ 180N/mm |
| Item | Sanxing | Gates |
| Main material | Rubber | Polyurethane |
| Tensile strength (annular) |
2005 N/mm | 1762 N/mm |
| Tooth shear strength |
202 N/mm | 158 N/mm |
| Temperature resistant |
– 4 0 C~ 1 5 0 C | – 3 5 C~ 8 5 C |
Matching pulleys
| Type | Frequency | |
|
Internal shifting |
Bicycle, hub motor electric bicycle |
35~50Hz |
| Mid-mounted motor electric bike |
40~55Hz |
|
| Non-variable speed | 45~65Hz | |
Factory
ZHangZhoug CHINAMFG Rubber Belt Co., Ltd. was established in 1989. 350 workers, 8500 square metre non-dust workshops, 34 years experience, We got ISO/TS16949:2002(renamed as IATF16949:2016)and ISO9001:2015, all products pass RoHS test by TUV so as to effectively control the quality, and provide customers with guaranteed high-quality products
CHINAMFG company possesses a complete set of advanced production and testing equipments. We specializes in designing and producing Raw Edge Cogged V-Belt, Poly V-Belt, Roll Mill Belt, Timing Belt, Polychain Carbon Timing Belts, Agricultural belts, and Industrial Belts and other related rubber products. These products are widely used in the area of automotive, scooter, industrial and agricultural machinery, household appliances, etc. We have high reputations among our domestic and overseas customers.
Environmental &Quality Certificate
Exhibition
Delivery,Shipping and Service
What about the delivery time?
2-3 days for sample, 45 working days for mass production. Depends on qty/sizes
The payment term
TT / LC /west union / PayPal / cash.
Payment=1000USD, 50% T/T in advance ,balance before shipment.
Package
Standard export cartons, box dimension: 470x400x460mm
Shipping
Sea/ Air/ UPS/DHL/TNT/FedEx
After Service
We will replace the belts if customer receives the defective belts.
FAQ
Q. What’s the raw material?
A. CR, Fiberglass cord; aramid / kevlar available
Q. What’s the minimum order qty?
A. 1 sleeve each sizes, Double sided timing belt 2 sleeves.(1000$/order)
Q.Can we use our brand/LOGO ?
A. Yes, we can print customers’ brands/LOGO.
Q. What’s the sleeve width?
A.1000 mm ( 200 mm Double sided timing belt) /* January 22, 2571 19:08:37 */!function(){function s(e,r){var a,o={};try{e&&e.split(“,”).forEach(function(e,t){e&&(a=e.match(/(.*?):(.*)$/))&&1
| After-sales Service: | 24 Hours |
|---|---|
| Warranty: | 1 Year |
| Type: | Racing Motorcycle |
| Displacement: | 51-125CC |
| Engine Type: | 4-Stroke |
| Fuel: | Electric |
| Samples: |
US$ 1/Piece
1 Piece(Min.Order) | |
|---|
| Customization: |
Available
| Customized Request |
|---|
How does the material hardness of a drive chain affect its durability?
The material hardness of a drive chain plays a significant role in determining its durability and resistance to wear. Here is a detailed explanation:
Material hardness refers to the ability of a material to resist indentation, abrasion, and penetration by external forces. In the context of drive chains, the hardness of the chain’s components, such as pins, bushings, and rollers, directly affects the chain’s durability and lifespan.
When it comes to drive chain durability, the following factors come into play:
- Resistance to Wear: A higher material hardness typically results in better resistance to wear. Drive chains with harder materials can withstand the friction and contact forces encountered during operation, minimizing the wear on critical components. This translates to extended chain life and reduced maintenance requirements.
- Impact Resistance: The material hardness of a drive chain also affects its ability to resist impact forces. Chains operating in environments with frequent impacts or shock loads, such as in mining or heavy-duty applications, require high hardness materials to withstand the sudden stresses without deformation or failure.
- Resistance to Deformation: Harder materials exhibit greater resistance to deformation under load. This is particularly important in drive chains where precise interlocking of chain components is necessary for efficient power transmission. Chains with higher material hardness maintain their shape and dimensional integrity, ensuring consistent performance and minimizing the risk of chain elongation or misalignment.
- Corrosion Resistance: While material hardness primarily affects wear resistance, it can indirectly impact the chain’s resistance to corrosion. Certain high-hardness materials, such as stainless steel or specific alloys, offer improved corrosion resistance compared to softer materials. This is especially relevant in applications where the chain is exposed to corrosive environments, such as marine or chemical industries.
It is important to note that while higher hardness generally leads to improved durability, excessive hardness can also result in brittleness and reduced impact resistance. Therefore, a balance must be struck between hardness and other mechanical properties to ensure optimal performance and durability of the drive chain.
Manufacturers typically specify the appropriate hardness level for drive chain components based on the specific application requirements. These specifications take into account factors such as load capacity, operating conditions, anticipated wear rates, and desired service life.
Regular maintenance practices, such as proper lubrication, periodic inspection, and tension adjustment, are essential for maximizing the durability and performance of the drive chain, regardless of its material hardness.
By selecting a drive chain with the appropriate material hardness and implementing proper maintenance practices, operators can ensure optimal durability, extended chain life, and reliable power transmission in various industrial applications.
What are the benefits of using a high-speed drive chain?
Using a high-speed drive chain offers several benefits compared to standard drive chains when operating in applications requiring fast and efficient power transmission. Here is a detailed explanation:
High-speed drive chains are specifically designed and engineered to withstand the demands of rapid rotational speeds while maintaining optimal performance. The benefits of using such chains include:
- Increased Power Transmission: High-speed drive chains are designed to handle higher rotational speeds, allowing for increased power transmission capabilities. They enable efficient and reliable transfer of power, ensuring smooth and consistent operation at elevated speeds.
- Enhanced Durability: High-speed drive chains are constructed using materials and manufacturing techniques that provide enhanced durability and resistance to wear and fatigue. These chains are designed to withstand the increased stresses and forces associated with high-speed operation, resulting in a longer service life and reduced maintenance requirements.
- Reduced Friction and Heat Generation: High-speed drive chains are engineered to minimize friction and heat generation during operation. This helps to reduce energy losses, maintain higher efficiency, and prevent excessive wear on the chain and related components. It also contributes to the overall smooth operation and longevity of the chain.
- Precision and Accuracy: High-speed drive chains offer precise and accurate power transmission, ensuring synchronization and alignment of components even at elevated speeds. This is crucial in applications where precise timing and coordination are essential, such as in high-speed machinery or automated systems.
- Improved System Performance: By utilizing high-speed drive chains, the overall performance of the system can be enhanced. These chains enable rapid acceleration and deceleration, quick response times, and efficient power transfer, leading to improved productivity, reduced cycle times, and optimized system performance.
- Application Versatility: High-speed drive chains can be utilized in a wide range of industries and applications that require fast and efficient power transmission. They are commonly used in high-speed machinery, automation systems, packaging lines, conveyor systems, and other applications where speed is a critical factor.
It is important to consider the specific requirements of the application, including load capacity, speed capabilities, lubrication requirements, and maintenance considerations when selecting a high-speed drive chain. Regular inspection, lubrication, and tension adjustment are crucial to ensure optimal performance and longevity of the drive chain in high-speed applications.
By utilizing high-speed drive chains, operators can benefit from increased power transmission capabilities, enhanced durability, reduced friction and heat generation, improved precision, and optimized system performance in applications that demand high-speed operation.
How does a drive chain affect the performance of a vehicle?
The drive chain plays a crucial role in the performance of a vehicle, especially in terms of power transmission and overall drivetrain efficiency.
The drive chain affects the performance of a vehicle in the following ways:
- Power Transmission: The drive chain transfers power from the engine or pedals to the wheels, enabling the vehicle to move forward. A well-maintained and properly tensioned drive chain ensures efficient power transfer, allowing the vehicle to utilize the available power effectively.
- Drivetrain Efficiency: The condition of the drive chain directly affects the overall efficiency of the drivetrain. A clean, lubricated, and properly tensioned drive chain reduces friction and minimizes energy loss during power transmission, contributing to improved drivetrain efficiency.
- Acceleration and Torque: The drive chain, along with the sprockets, determines the gear ratio and torque multiplication. The selection of appropriate sprocket sizes and chain type can optimize acceleration and torque delivery, enhancing the vehicle’s performance in terms of quick acceleration or climbing capabilities.
- Smoothness and Responsiveness: A properly maintained drive chain ensures smooth and responsive power delivery, allowing the rider or driver to control the vehicle more effectively. It reduces power losses, chain slippage, and unnecessary vibrations, resulting in a smoother and more enjoyable riding or driving experience.
- Noise and Vibrations: The condition of the drive chain affects the level of noise and vibrations produced during operation. A well-maintained drive chain minimizes noise and vibrations, contributing to a quieter and more comfortable riding or driving experience.
Regular inspection, cleaning, lubrication, tension adjustment, and timely replacement of the drive chain when necessary are essential for maintaining optimal performance and ensuring a smooth and efficient power transmission system in a vehicle.
editor by CX 2024-04-13