CZPT protective jacket extruder for pre-insulated pipe
HDPE Pipe Extrusion Line produced by HUASHIDA is large-efficiency tools with large pace and power saving, it is effortless to work with the automated handle program and has a prolonged provider existence.
The PE pipe is employed for PU foam pre-insulating pipe, which consists of steel pipe, polyurethane foam layer, and PE jacket pipe.
The extrusion line includes tools and gadgets as under:
-1set Vacuum loader
-1set Hopper dryer
-1set Higher-effectiveness one screw extruder
-1set Vacuum calibration table
-1set Water spraying tank
-1set Hauling equipment
-1set Reducing device
-1set Stacker
Fashion | PE-one hundred ten/600 | PE-655/1372 | PE-960/1680 |
Primary extruder | SJ-seventy five/33 | SJ-a hundred and twenty/33 | SJ-one hundred fifty/33 |
Pipe diameter | Φ110-600mm | Φ 655-1372 mm | Φ 960-Φ 1680mm |
Ability | 250-350kg/h | 700~900 kg/h | 800-1200kg/h |
Mounted power | 160kw | 440 kw | 580kw |
Size | 28m | 32m | 45m |
Large-performance one screw extruder
A solitary screw is with barrier & mixing head the barrel is a new model with slotting (channel), Each make the stability of excellent jellification, large output, and steady overall performance.
Vacuum Calibration Tank
Vacuum calibration tank is largely composed of frame, stainless steel tank, vacuum technique, spray cooling program, again and forth mobile gadget. When it is at operate, the vacuum pump exhausts the air from the sealed tank to pressurize the new pipe cling to calibrating copper sleeve and to realize calibrating the pipe outer diameter. Spray cooling technique is used to cool down the extruded pipe by h2o. Spray nozzles spray cooling h2o from all directions on the pipe floor to great down the pipe immediately.
CZPT Haul-off Device
The haul-off equipment is largely composed of a driving device, haul-off chain caterpillar, clamping structure, adjusting system, facet plate, and basis bed. Haul-off caterpillars are AC motor pushed and adopt frequency control of velocity to adapt to various pipes extruding pace. It is also outfitted with an computerized duration measuring device to understand cutter slicing at a set length.
No-Dust Planetary Cutter
It adopts the blade punching theory to recognize no-dust reducing. It is primarily composed of chopping units, clamping units, structure synchronous cell gadgets, and frames.
Management system
The complete line could be controlled by PLC, with a excellent human-device interface, all technical parameters could be set and indicated by touching the monitor. Controlling technique is developed according to the consumers prerequisite, to be with PLC, or CZPT.
Discharging frame
The table area is manufactured of stainless steel. It adopts pneumatic overturn and discharging automatically.
Shipping
Client Going to